Fike produces the world's most reliable discs which protect industries around the world from dowtime, equipment damage and injury.
Fike’s rupture discs are designed to meet your facility’s pressure protection needs. Below is a comparison chart of the many discs we have to offer. And if you don’t find the disc that meets your needs, connect with a Fike representative to start the conversation on custom engineered solutions for your facility.
FIKE AD Series Rupture Disc Sanitary Application Designed for overpressure and/or vacuum protection of atmospheric vessels. Material: 316 SST top and bottom sections with a fluoropolymer seal Low burst pressures available, 1 PSIG (.07 BARG) to 15 PSIG (1.03 BARG) Sizes: 2 IN (DN50) to 24 IN (DN600). Larger sizes are available |
|
FIKE ERD Series Extruder Rupture Disc The minimum burst pressure: for a 3/16” (DN 4.5) diameter ERD is 1500 psig (104 barg). Maximum available burst pressures are 12,000 psig (830 barg) at 800°F (425°C) for soldered units. Material: Stainless steel for the body and Inconel® 600 for the rupture disc.
|
|
FIKE P Series Rupture Disc DN 15-600 The Conventional Prebulged (P) Rupture Disc is a single-member disc that may utilize a Teflon® orpolyurethane coating on either or both sides. A vacuum support may be used in conjunction with the Conventional Prebulged (P) Disc and can be coated on either or both sides with Teflon or polyurethane. Vacuum supports are not normally required if the burst pressure of the disc is in excess of 1000 PSIG (69 BARG). If the disc may be subjected to back pressures in excess of 14.7 PSIG (1.013 BARG), as it may be necessary to construct a special pressure support.
|
|
FIKE Poly-SD Rupture Disc DN 15-600 Application in liquid, vapor and two phase flow . . Material: Carbon steel and 316 SST, Other materials and configurations are available on request. The Poly-SD rupture disc is commonly used with the Viscous Tee. |
|
FIKE SCRD Series Rupture Disc SCRD-FSR SERIES high pressure applications DN: 25-600 SCRD-FS SERIES high pressure applications DN 15-20 SCRD-UT SERIES high pressure applications DN 15-50 SCRD-V CROSS SCORED SERIES wide range of over pressure protection applications DN 50-600 |
|
FIKE SHX Sanitary Rupture Disc DN 40-50 The SHX rupture disc is a forward acting, cross scored rupture disc, ideal for high pressure sanitary Superior design for CIP/SIP requirements 316 SST tag visually confirms proper installation and orientation Temperature limit: 250°F (121°C) (consult factory for higher temperatures) |
|
FIKE HO HOV Rupture Disc The HO/HOV is commonly manufactured with a 316 SST top section and vacuum support with an FEP DN 25-600 The HOV-FS is a forward-acting, flat-seated rupture disc device, commonly used for overpressure protection DN 600-1200 |
|
FIKE Conventional Pre-bulged Disc Sizes: 1/4”-2” The Fike Conventional Pre-bulged Disc (CPD) is a solid metal/single element, pre-bulged (pre-formed), rupture disc which serves as a differential pressure relief device. The CPD can be used as a primary or secondary pressure relief device, or used in combination with other pressure relief devices. Designed for installation in flanges which utilize the standard 30° angular seating arrangement..
|